MATEC Web Conf.
Volume 145, 2018NCTAM 2017 – 13th National Congress on Theoretical and Applied Mechanics
|Number of page(s)||9|
|Published online||09 January 2018|
A correlation between fracture toughness and cohesion strength of molybdenum thermal sprayed coatings
Romanian Research and Development Institute for Gas Turbines COMOTI, 220D Iuliu Maniu Ave., Bucharest 6, Romania
* Corresponding author: email@example.com
The Molydenum thermal sprayed coatings on steel substrate using electric arc, atmospheric plasma spray and high velocity oxy-fuel spray were investigated. The tensile bond strength tests were made in order to examine the degree of adhesion/cohesion strength of coatings. The Vickers indentation fracture toughness tests were made on parallel and perpendicular direction to the coating-substrate interface in order to examine the fracture toughness of the material in relationship with the microstructure, indentation direction, hardness and the length of microcracks developed under different loads. It was found that the fracture toughness is influenced by the direction and load of indentation. It was established a correlation between the fracture toughness and cohesion strength of Mo coatings and a general trend was described
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.