MATEC Web Conf.
Volume 143, 2018IV International Young Researchers Conference “Youth, Science, Solutions: Ideas and Prospects” (YSSIP-2017)
|Number of page(s)||7|
|Published online||08 January 2018|
Aluminum surface modification by electron-ion-plasma methods
Institute of High Current Electronics, Siberian Branch, Russian Academy of Sciences, 634055 Tomsk, Russia
* Corresponding author: firstname.lastname@example.org
The paper focuses on detection and structural-phase justification of the modes of combined electron-ion plasma treatment of commercially pure A7 grade aluminum carried out in a single vacuum cycle and enabling to enhance mechanical (microhardness) and tribological (wear resistance) properties of the material. Commercially pure A7 grade aluminum underwent combined surface treatment, including deposition of titanium coating by means of vacuum-arc technique and further mixing of the coating/substrate system by intense pulsed electron beam. The varied parameters were energy density of the electron beam (10, 15, 20) J/cm2 and the number of impact pulses (3-100); the thickness of titanium coating was 0.5 μm. Electron-ion plasma treatment of aluminum was carried out in a single vacuum cycle. Optical and scanning electron microscope investigations, measuring of microhardness and tribological tests allowed defining the modes when hardness and wear resistance of the modified surface layer increases manifold in comparison to the initial properties of commercially pure aluminum.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.