Issue |
MATEC Web Conf.
Volume 142, 2018
International Conference on Materials Applications and Engineering 2017 (ICMAE2017)
|
|
---|---|---|
Article Number | 03008 | |
Number of page(s) | 6 | |
Section | Metals, Alloys and Coatings | |
DOI | https://doi.org/10.1051/matecconf/201814203008 | |
Published online | 08 January 2018 |
Preparation and Characterization of FC Films Coated on PET Substrates by RF Magnetron Sputtering
1
Guangdong Provincial Research Center on Smart Materials and Energy Conversion Devices, Guangdong Provincial Key Laboratory of Functional Soft Condensed Matter, School of Materials and Energy, Guangdong University of Technology, Guangzhou 510006, Guangdong, China
2
Guangdong College Research Center of Functional Textile Engineering and Technology, School of Textile and Clothing, Wuyi University, Jiangmen 529020, Guangdong, China
* Corresponding author: sglu@gdut.edu.cn
Fluorocarbon (FC) films were prepared on polyethylene terephthalate (PET) plates and PET fabrics respectively by a radiofrequency (RF) magnetron sputtering technique using polytetrafluoroethylene (PTFE) as a target. Scanning electron microscope and X-ray photoelectron spectroscopy were used to investigate the morphology, structure and composition of the obtained FC films. The hydrophobicity and uvioresistant properties of the FC film coated fabric were studied. The results show that the FC films were successfully deposited on the PET substrates by a RF magnetron sputtering. The deposited films are made up of four components -CF3, -CF2-, CF- and -C-. The proportions of the four components and surface morphologies of the deposited films vary with the sputtering conditions. Compared with the original fabric samples, the hydrophobicity of the FC film coated fabrics is quite good and improved significantly.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.