MATEC Web Conf.
Volume 141, 2017The Fifth International Youth Forum “Smart Grids 2017”
|Number of page(s)||4|
|Published online||12 December 2017|
Mathematical simulation of analog-to-digital converter
National Research Tomsk Polytechnic University, 634050 Tomsk, Russia
* Corresponding author: firstname.lastname@example.org
Numerical relay protection devices (NRP) are a promising area for the development of protection equipment for electric power systems. For its development, research and, in some cases, setting mathematical models are used. At the same time, the converting part of the NRP, which realizes the analog-to-digital conversion (ADC) of the analog input signal to the digital one, with which the microprocessor of the NRP works directly, is often ignored in models. The purpose of this work is to study the characteristics and parameters of the ADC, as well as to evaluate its impact on the operation of the ADC itself and need to take into account those or other characteristics in the simulation. To develop the ADC model, the C programming language was used. The ADC model is takes into account the cutoff frequency of the analog signal, sampling period, and number of samples required. The characteristics and parameters of the ADC are studied, their effect on the operation of the ADC is estimated. The result of this study – the ADC must be modeled as completely as possible, since its operation depends on the correct functioning of the NRP algorithm.
© The Authors, published by EDP Sciences, 2017
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.