Issue |
MATEC Web Conf.
Volume 139, 2017
2017 3rd International Conference on Mechanical, Electronic and Information Technology Engineering (ICMITE 2017)
|
|
---|---|---|
Article Number | 00045 | |
Number of page(s) | 4 | |
DOI | https://doi.org/10.1051/matecconf/201713900045 | |
Published online | 05 December 2017 |
A Novel Boost Conversion with High Voltage Ratio
1 College of Electrical and Control Engineering, Xi’an University of Science and Technology, Xi’an 710054 China
Corresponding author: larrynance@126.com
When the traditional Boost converter duty cycle exceeds a certain value, the output voltage is not only increased, but will be reduced. Therefore, a new Boost converter with intermediate tap is proposed. By replacing the ordinary inductance of the traditional Boost converter with the inductance with the intermediate tap, the theoretical comparison is made with respect to the traditional boost converter. Under the same duty cycle, The Boost converter has a significant high gain ratio. Finally, the simulation and experimental analysis of the proposed new Boost converter are carried out by simulation software Pspice. The experimental results show that the new Boost converter has a significant high gain ratio compared with the traditional boost converter.
© The Authors, published by EDP Sciences, 2017
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.