MATEC Web Conf.
Volume 139, 20172017 3rd International Conference on Mechanical, Electronic and Information Technology Engineering (ICMITE 2017)
|Number of page(s)||5|
|Published online||05 December 2017|
Dynamic modeling and simulation of trailer with compliance steering system
1 College of Automobile and Traffic Engineering, Nanjing Forestry University, Nanjing, 210037, China
2 College of mechanical and electrical engineering, Nanjing Forestry University, Nanjing, 210037, China
* Corresponding author: email@example.com
Stability of a vehicle and tire wear is affected by the movement inference between the tractor and the trailer when the trailer is turning. Therefore, to solve the problem, Compliant Steering (CS) system is used. The system makes the rear-wheel of the trailer steer. After establishing a dynamic model of the trailer and the CS system, the simulation result shows that the system has a smaller lateral force. This smaller force at the hinge point indicates movement inference is reduced and motion response is far better. Furthermore, this paper contains the analysis of the influence of the key parameters of CS system and the speed on the moving characteristics of the trailer.
© The Authors, published by EDP Sciences, 2017
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.