MATEC Web Conf.
Volume 138, 2017The 6th International Conference of Euro Asia Civil Engineering Forum (EACEF 2017)
|Number of page(s)||10|
|Section||2-Structural and Construction Engineering|
|Published online||30 December 2017|
Numerical Modelling of Interior RC Beam-Column Joints for Non-Engineered Buildings Strengthened Using Steel Plates
1 Student, Department of Civil and Environmental Engineering, Universitas Gadjah Mada, Yogyakarta, Indonesia
2 Department of Civil and Environmental Engineering, Universitas Gadjah Mada, Yogyakarta, Indonesia
* Corresponding author: firstname.lastname@example.org
Data examination regarding historical earthquakes in Indonesia has revealed that damages occurred mostly in non-engineered buildings. Many non-engineered buildings have serious design and construction deficiencies in using concrete of inadequate quality and have poor steel reinforcement detailing especially in their beam-column joints. These joints require an effective strengthening technique which is simple to install. This paper presents steel plates to reinforce concrete beam-column joints through numerical studies. The finite element model was developed using ABAQUS. The FEM results were validated by comparisons with previous experimental tests. For this purpose, two RC beam-column joints were analyzed, including original standard beam columns and non-standard steel detailing strengthened with steel plates. The comparison of the results from numerical model indicated that steel plates could increase lateral strength, ductility, energy dissipation and increase the shear strength of the joints.
© The Authors, published by EDP Sciences, 2017
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.