| Issue |
MATEC Web Conf.
Volume 132, 2017
XIII International Scientific-Technical Conference “Dynamic of Technical Systems” (DTS-2017)
|
|
|---|---|---|
| Article Number | 03002 | |
| Number of page(s) | 4 | |
| Section | Issues of mechanics of heterogeneous and composite materials | |
| DOI | https://doi.org/10.1051/matecconf/201713203002 | |
| Published online | 31 October 2017 | |
Investigation of the influence of contact friction forces in tests on the strength of compressing wall materials
1 Don State Technical University, Rostov-on-Don, Russia
2 Academy of Architecture and Construction, Don State Technical University, Rostov-on-Don, Russia
* Corresponding author: lukinova-n@va.ru
The results of the experiment are presented, which estimate the effect of the support friction in standard tests on axial compression on the output strength characteristics of the hand-formed brick. The effect of surface parameters on the compressive strength was established. The optimal shape and dimensions of the samples, as well as the method of preparation of their surfaces, were determined.
© The Authors, published by EDP Sciences, 2017
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.