| Issue |
MATEC Web Conf.
Volume 128, 2017
2017 International Conference on Electronic Information Technology and Computer Engineering (EITCE 2017)
|
|
|---|---|---|
| Article Number | 03012 | |
| Number of page(s) | 5 | |
| Section | Electronic Material | |
| DOI | https://doi.org/10.1051/matecconf/201712803012 | |
| Published online | 25 October 2017 | |
Study on Hot Diaphragm Forming Process of CCF300/5228A Composites
National Key Laboratory of Advanced Composites, AVIC Composites Technology Center, Composites Company LTD of AVIC, Beijing, 100095, China
a Corresponding author: yanli0827@163.com
In this paper, the hot diaphragm forming process of CCF300/5228A composite was studied through self-developed hot diaphragm forming equipment. CCF300/5228A prepreg for the hot diaphragm forming process was modified. Combined the physical and chemical experiment of CCF300/5228A prepreg with modeling analysis of deformation behavior, the processing parameters of CCF300/5228A composites for hot diaphragm forming process were selected and optimized. Composites with C-shaped structure were fabricated according to the optimum parameters of hot diaphragm forming process, and final C-shaped composites could satify the requirments of design.
© The authors, published by EDP Sciences, 2017
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.