| Issue |
MATEC Web Conf.
Volume 128, 2017
2017 International Conference on Electronic Information Technology and Computer Engineering (EITCE 2017)
|
|
|---|---|---|
| Article Number | 03003 | |
| Number of page(s) | 5 | |
| Section | Electronic Material | |
| DOI | https://doi.org/10.1051/matecconf/201712803003 | |
| Published online | 25 October 2017 | |
An Extrusion Die with Twin Cavities for Semi-hollow Al-Profiles
1
Guangzhou Vocational College of Science and Technology, Guangzhou, 510550, China
2
Guangzhou Vocational College of Science and Technology, Guangzhou, 510550, China
a 41784402@qq.com
a SQF6410@163.com
* The corresponding author
The importance of extrusion die with multi-cavities was elaborated. Through an actual case. A new structure for the semi-hollow Al-profiles was introduced. The structure named substituted type to solve the cantilever strength was presented. And the selection and the optimization of structure parameters were described in detail. Including the determination of extrusion machine ability, the layout for the die holes, the use of computer simulation software for analysis and comparison to determine the arrangement of portholes, the structure of chamber in female die, the selection of bearing etc. It was shown that the structure with twin cavities for semi-hollow profiles is effective, the structure can greatly improve the production efficiency and reduce the cost. It is worth promoting. The purpose is to provide reliable data and reference for the further research and development of this technology on the extrusion die with multi-cavities in a die.
© The authors, published by EDP Sciences, 2017
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.