MATEC Web Conf.
Volume 125, 201721st International Conference on Circuits, Systems, Communications and Computers (CSCC 2017)
|Number of page(s)||4|
|Published online||04 October 2017|
Impact behaviour of acrylonitrile-butadiene-styrene after temperature and humidity load
Tomas Bata University in Zlin, nam. T. G. Masaryka 5555, 76001 Zlin, Czech Republic
* Corresponding author: firstname.lastname@example.org
This study deals with acrylonitrile-butadiene-styrene (ABS) which was subjected the drop-weight test before and after temperature and humidity load. ABS is an engineering plastic and also an important engineering terpolymer, which has butadiene part uniformly distributed through the acrylonitrile-styrene matrix and is commonly used in production of automotive interior components. The injection moulded ABS samples were subjected the penetration test at fall height 100 J before and after temperature and humidity load and the results were subsequently evaluated and discussed. It was found out that ABS after temperature and humidity load has lower impact resistance.
© The Authors, published by EDP Sciences, 2017
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.