Issue |
MATEC Web Conf.
Volume 123, 2017
2017 The 2nd International Conference on Precision Machinery and Manufacturing Technology (ICPMMT 2017)
|
|
---|---|---|
Article Number | 00017 | |
Number of page(s) | 5 | |
DOI | https://doi.org/10.1051/matecconf/201712300017 | |
Published online | 21 September 2017 |
A study of small sized quartz tuning fork using finite element analysis
Department of Mechanical and Electro-Mechanical Engineering, National I-Lan University, I-Lan, Taiwan, R.O.C
* e-mail: gctsai@niu.edu.tw
This is a preliminary study to small sized quartz tuning fork operating at 32.768 kHz for several types of supporting structure. Tine length and tine width can be calculated by Euler-Bernoulli equation (Exact Solution), but the base shall be analyzed by FEM (Approximation Solution) due to flexibility of base design. Finite Element Method (FEM) software ANSYS is used to simulate quartz tuning fork to extract electric response from harmonic analysis. Several types of supporting structure are to compare to modified tuning fork with notch by simulation.
© The Authors, published by EDP Sciences, 2017
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.