| Issue |
MATEC Web Conf.
Volume 117, 2017
RSP 2017 – XXVI R-S-P Seminar 2017 Theoretical Foundation of Civil Engineering
|
|
|---|---|---|
| Article Number | 00113 | |
| Number of page(s) | 8 | |
| DOI | https://doi.org/10.1051/matecconf/201711700113 | |
| Published online | 24 July 2017 | |
The shear behaviour of pine wood in the Arcan test with the digital image correlation
University of Warmia and Mazury in Olsztyn, Faculty of Geodesy, Geospatial and Civil Engineering, Oczapowskiego 2, 10-719 Olsztyn, Poland
* Corresponding author: leszek.malyszko@uwm.edu.pl
The Arcan shear test is used together with the digital image correlation to study the shear stress-strain relationship for pine wood in the symmetry plane LR. The relationship of shearing perpendicular to the grain direction is shown by the straight line below the proportional limit and the nonlinear curve beyond it describing hardening up to the ultimate limit. Subsequent failure modes are shown during the load increase. Additionally, some results of the off-axis tension tests, as well as the uniaxial tension tests, with the mechanical and electric resistance strain gauges are presented to determine and compare the shear modulus from both methods of testing.
© The Authors, published by EDP Sciences, 2017
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.