| Issue |
MATEC Web Conf.
Volume 115, 2017
XXXIII Siberian Thermophysical Seminar (STS-33)
|
|
|---|---|---|
| Article Number | 05019 | |
| Number of page(s) | 4 | |
| Section | Chapter 5 Heat and mass transfer in multiphase flows | |
| DOI | https://doi.org/10.1051/matecconf/201711505019 | |
| Published online | 10 July 2017 | |
The distribution of the gas phase in the bubble flow in the vertical assembly of 3×3 rods with gas injection from a single source
Kutateladze Institute of Thermophysics, Novosibirsk, 630090, Acad. Lavrentiev ave., 1, Russia
* Corresponding author: lobanov@itp.nsc.ru
The work is devoted to an experimental study of the distribution of gas along the channel cross-section in the form of an assembly of vertical rods 3×3 in a square arrangement. The gas was introduced into the channel from the corner rod through a single capillary. Upstream, a local gas content sensor was attached to the the central fuel element simulator. The position of the sensor was changed by rotating the rod around its axis. The experiment was carried out at Reynolds numbers Re = 4500 - 9000 and flow rate gas contents of 2 - 4%.
© The Authors, published by EDP Sciences, 2017
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.