Issue |
MATEC Web Conf.
Volume 115, 2017
XXXIII Siberian Thermophysical Seminar (STS-33)
|
|
---|---|---|
Article Number | 02011 | |
Number of page(s) | 4 | |
Section | Chapter 2 Turbulent flows, heat and mass transfer in single-phase flows, heat transfer enhancement | |
DOI | https://doi.org/10.1051/matecconf/201711502011 | |
Published online | 10 July 2017 |
Effect of blowing/suction through porous surfaces on boundary layer at supersonic Mach numbers
Khristianovich Institute of Theoretical and Applied Mechanics SB RAS 630090, Institutskaya, 4/1, Novosibirsk, Russia
* Corresponding author: polivanov@itam.nsc.ru
The effect of blowing/suction through perforated surfaces on the turbulent boundary layer was studied experimentally at Mach number M = 1.4. In the experiments, several different porous surfaces were investigated in a wide range of the blowing/suction mass flow rate. The distributions of the integral parameters of boundary layer were obtained depending on the type of porosity and mass flow rate. The integral effect from shock waves on boundary layer depends on set of parameters, which makes search of optimal parameters of porosity difficult.
© The Authors, published by EDP Sciences, 2017
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.