| Issue |
MATEC Web Conf.
Volume 114, 2017
2017 International Conference on Mechanical, Material and Aerospace Engineering (2MAE 2017)
|
|
|---|---|---|
| Article Number | 01004 | |
| Number of page(s) | 6 | |
| Section | Chapter 1: Mechanical | |
| DOI | https://doi.org/10.1051/matecconf/201711401004 | |
| Published online | 10 July 2017 | |
Dynamic Simulation of Rigid Guide Structure Based on ANSYS
1 Anhui University of Science and Technology, Huainan Anhui, China
2 Anhui University of Science and Technology, Huainan Anhui, China
a Corresponding author: xzhang@aust.edu.cn
In order to reflect the varying law of the deflection of the rigid guide when the relative motion occur between the rigid guide and the cage roller, transient dynamic simulation is carried out for the commonly used calculation model of rigid guide and bunton by ANSYS. Simulation of the horizontal force through a section of the guide evenly, and the deflection curves of each model are obtained. It is found that the deflection of the simply supported beam model is the largest, and the three-span continuous beam model have similar peak spans in each span with the spatial grid model, but the spatial grid model has obvious fluctuation with the horizontal force.
© The Authors, published by EDP Sciences, 2017
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.