MATEC Web Conf.
Volume 112, 201721st Innovative Manufacturing Engineering & Energy International Conference – IManE&E 2017
|Number of page(s)||6|
|Section||Mechanical and Manufacturing Equipment, Devices and Instrumentation, Design and Analysis|
|Published online||03 July 2017|
Comparative study on the lateral run-out of friction surfaces measurement of brake discs using a brake roller tester and a dial gauge
University Politehnica of Bucharest, Faculty of Transports, Automotive Engineering Department, Splaiul Independentei 313, Romania
* Corresponding author: firstname.lastname@example.org
Brake system diagnosis is one of the most common and necessary technical operations applied to the car, regardless of its type and operating phases. Measuring the diagnostic parameters on a roller brake tester is a fast operation with no disassembly necessary. Measuring the run-out of friction surfaces of brake discs with a dial gauge is an action that requires more extensive preparatory operations but it offers a high accuracy of the results. The paper aims to analyze the correlation between the dial gauge measured values and the diagnostic obtained using the brake roller tester.
© The Authors, published by EDP Sciences, 2017
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.