| Issue |
MATEC Web Conf.
Volume 112, 2017
21st Innovative Manufacturing Engineering & Energy International Conference – IManE&E 2017
|
|
|---|---|---|
| Article Number | 04017 | |
| Number of page(s) | 6 | |
| Section | Advanced Materials | |
| DOI | https://doi.org/10.1051/matecconf/201711204017 | |
| Published online | 03 July 2017 | |
Tensile tests of specimens made of selected group of the filament materials manufactured with FDM method
1 Silesian University of Technology, Faculty of Mechanical Engineering, Institute of Engineering Processes Automation and Integrated Manufacturing Systems, Konarskiego 18A, Gliwice, Poland
2 3DGence, Konarskiego 18C, Gliwice, Poland
* Corresponding author: cezary.grabowik@polsl.pl
This paper presents results of tensile tests carried out for specimens made of the selected group of the filament materials. As a manufacturing technology FDM 3D printing method was chosen. The selected group of the filament materials involved the group of wood, PLA, ABS, PET, PMMA and ASA. Herein, it should be noticed, that technical data sheets that are delivered by filament materials producers include data that are valid for only one specific printing direction. This printing direction is deliberately selected, in such way that ensures the best material characteristics. Therefore, received during the research results allow to make comparison between a catalogue data and data obtained in the printing process. It aids both mechanical designer and product manufacturer at the stage of the printed product mechanical properties shaping.
© The Authors, published by EDP Sciences, 2017
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.