| Issue |
MATEC Web Conf.
Volume 112, 2017
21st Innovative Manufacturing Engineering & Energy International Conference – IManE&E 2017
|
|
|---|---|---|
| Article Number | 03005 | |
| Number of page(s) | 6 | |
| Section | Non-Conventional Technologies in Manufacture and Industry, Welding Technologies | |
| DOI | https://doi.org/10.1051/matecconf/201711203005 | |
| Published online | 03 July 2017 | |
Some aspects of finite element modelling of ultrasonically aided micro-EDM of CoCr alloys
“Politehnica” University of Bucharest, Manufacturing Engineering Department, 313 Splaiul Independentei, Bucharest, Romania
* Corresponding author: daniel.ghiculescu@upb.ro
The paper deals with finite element modelling of micromachining CoCr alloys by ultrasonically aided electrical discharge machining. This hybrid machining process has two components: a thermal one due to EDM, and a mechanical one to ultrasonic assistance. Both components were modelled using Thermal and Structural Mechanics time dependent modules of Comsol Multiphysics. The results were compared with the experimental data obtained in our laboratories, proving a good agreement and offering some solutions for machining optimization.
© The Authors, published by EDP Sciences, 2017
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.