| Issue |
MATEC Web Conf.
Volume 110, 2017
International Youth Scientific Conference “Heat and Mass Transfer in the Thermal Control System of Technical and Technological Energy Equipment” (HMTTSC 2017)
|
|
|---|---|---|
| Article Number | 01038 | |
| Number of page(s) | 5 | |
| DOI | https://doi.org/10.1051/matecconf/201711001038 | |
| Published online | 19 June 2017 | |
Research of thermal conditions over high-temperature gas-fired infrared emitters
1 Tyumen industrial University, 625000 Tyumen, Russia
2 National Research Tomsk Polytechnic University, 634050 Tomsk, Russia
* Corresponding author: khaustovsa@tpu.ru
The paper presents the study results of the thermal conditions in the area above high-temperature gas-fired infrared emitter. A number of bench tests and experiments were made on the basis of production facilities to control the distribution of temperatures above emitter in different heating system operating modes. Impact of the thermal characteristics in the area above high-temperature gas-fired infrared emitter on the heating system performance was estimated. Comparison of the bench tests results with existing experimental data has shown a good result convergence for both efficiency and accuracy. The obtained results can be used in the emitter development phase and in the construction phase of modern gas-fired radiant heating systems.
© The Authors, published by EDP Sciences, 2017
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.