| Issue |
MATEC Web Conf.
Volume 107, 2017
Dynamics of Civil Engineering and Transport Structures and Wind Engineering – DYN-WIND’2017
|
|
|---|---|---|
| Article Number | 00045 | |
| Number of page(s) | 7 | |
| DOI | https://doi.org/10.1051/matecconf/201710700045 | |
| Published online | 24 May 2017 | |
Analysis of bond behaviour in strengthened reinforced concrete beam with carbon fiber reinforced polymer lamella
University of Žilina, Faculty of Mechanical Engineering, Department of Applied Mechanics, Univerzitná 1, 010 26 Žilina, Slovakia
* Corresponding author: milan.zmindak@fstroj.uniza.sk
Carbon fiber reinforced polymer (CFRP) can be used to strengthen the reinforced concrete (RC) beams. The debonding is the main failure model and strengthening is limited. The paper deals with the finite element analysis of influence of CFRP strip on stress distribution in a steel reinforced concrete beam loaded by four-point bending on RC beam with and without CFRP lamella. Simulation of the delamination is modelled by a cohesion zone material model using ABAQUS and ANSYS software.
© The Authors, published by EDP Sciences, 2017
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.