Issue |
MATEC Web Conf.
Volume 101, 2017
Sriwijaya International Conference on Engineering, Science and Technology (SICEST 2016)
|
|
---|---|---|
Article Number | 05004 | |
Number of page(s) | 5 | |
Section | Green Constructions | |
DOI | https://doi.org/10.1051/matecconf/201710105004 | |
Published online | 09 March 2017 |
Saturated and unsaturated stability analysis of slope subjected to rainfall infiltration
School of Civil Engineering, Nanyang Technological University, 50 Nanyang Avenue, 639798 Singapore
* Corresponding author: nurlygofar@ntu.edu.sg
This paper presents results of saturated and unsaturated stability analysis of typical residual slopes subjected to rainfall infiltration corresponds to 50 years rainfall return period. The slope angles considered were 45° and 70°. The saturated stability analyses were carried out for original and critical ground water level commonly considered by practicing engineer. The analyses were conducted using limit equilibrium method. Unsaturated stability analyses used combination of coupled stress–pore-water pressure analysis to evaluate the effect of rainfall infiltration on the deformation and transient pore-water pressure on slope stability. Slope stability analyses were performed at some times during and after rainfall infiltration. Results show that the critical condition for slope made by sandy material was at the end of rainfall while for clayey material was at some specified times after the rainfall ceased. Unsaturated stability analysis on sandy soil gives higher factor of safety because the soil never reached saturation. Transient analysis using unsaturated soil concept could predict more critical condition of delayed failure of slopes made up of clayey soil.
© The Authors, published by EDP Sciences, 2017
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.