MATEC Web Conf.
Volume 92, 2017Thermophysical Basis of Energy Technologies (TBET-2016)
|Number of page(s)||6|
|Published online||21 December 2016|
Thermal hydraulic efficiency of a single diaphragm established with a clearance in a circular tube
Kutateladze Institute of Thermophysics, 630090 Novosibirsk, Russia
* Corresponding author: email@example.com
Results of a numerical study of the flow structure and turbulent heat transfer in a round tube with a mounted single diaphragm with height h and some clearance c between the tube and the diaphragm. The size of the clearance between the diaphragm and the tube wall was varied within range A = c/h = 0 – 0.33. It was determined that an increase in the gap between the diaphragm and the tube wall alters the structure of the recirculation region and eliminate the stagnation zones in the region of secondary vortex. The flow regime, when the values of average heat transfer behind the diaphragm in the presence of a clearance exceed those for the attached rib, was distinguished. When increasing the gap height from A = 0 to 0.33, the thermal enhancement factor increases by 30%.
© The Authors, published by EDP Sciences, 2017
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.