Issue |
MATEC Web Conf.
Volume 92, 2017
Thermophysical Basis of Energy Technologies (TBET-2016)
|
|
---|---|---|
Article Number | 01004 | |
Number of page(s) | 5 | |
DOI | https://doi.org/10.1051/matecconf/20179201004 | |
Published online | 21 December 2016 |
Microwave resonator method of dynamic measurement of mass of the samples of gasifying solid fuel
Voevodsky Institute of Chemical Kinetics and Combustion, 630090 Novosibirsk, Russia
* Corresponding author: zarko@kinetics.nsc.ru
The paper describes novel contactless method of determining instantaneous gasification rate of solid materials under intensive blowing the reacting (gasified) surface. Method is based on dynamic measurement of the mass of dielectric substance within specially designed microwave resonator. The attenuation of passing through the resonator signal is proportional to the actual value of the sample mass. Before firing experiments the setup is calibrated using samples of studied material with different channel radius. With the proper choice of data acquisition system one can achieve the web sample thickness resolution around few microns and time resolution higher than 1 kHz. The examples of preliminary tests with paraffin samples blown by air jets with temperatures of 350-1500 K and speeds of 375–700 m/s are presented.
© The Authors, published by EDP Sciences, 2017
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.