Issue |
MATEC Web Conf.
Volume 91, 2017
The Fourth International Youth Forum “Smart Grids 2016”
|
|
---|---|---|
Article Number | 01004 | |
Number of page(s) | 5 | |
DOI | https://doi.org/10.1051/matecconf/20179101004 | |
Published online | 20 December 2016 |
Promising Direction of Perfection of the Utilization Combine Cycle Gas Turbine Units
Tomsk Polytechnic University, 634050, Tomsk, Russia
* Corresponding author: gal@tpu.ru
Issues of improving the efficiency of combined cycle gas turbines (CCGT) recovery type have been presented. Efficiency gas turbine plant reaches values of 45 % due to rise in temperature to a gas turbine to 1700 °C. Modern technologies for improving the cooling gas turbine components and reducing the excess air ratio leads to a further increase of the efficiency by 1-2 %. Based on research conducted at the Tomsk Polytechnic University, it shows that the CCGT efficiency can be increased by 2-3 % in the winter time due to the use of organic Rankine cycle, low-boiling substances, and air-cooled condensers (ACC). It is necessary to apply the waste heat recovery with condensation of water vapor from the flue gas, it will enhance the efficiency of the CCGT by 2-3 % to increase the efficiency of the heat recovery steam boiler (HRSB) to 10-12 %. Replacing electric pumps gas turbine engine (GTE) helps to reduce electricity consumption for auxiliary needs CCGT by 0.5-1.5 %. At the same time the heat of flue gas turbine engine may be useful used in HRSB, thus will increase the capacity and efficiency of the steam turbine.
© The Authors, published by EDP Sciences, 2017
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.