| Issue |
MATEC Web Conf.
Volume 89, 2017
Laboratory Methods
|
|
|---|---|---|
| Article Number | 01001 | |
| Number of page(s) | 6 | |
| DOI | https://doi.org/10.1051/matecconf/20178901001 | |
| Published online | 09 December 2016 | |
Investigation of mixing chamber for experimental FGD reactor
Department of Power Engineering Equipment, Faculty of Mechanical Engineering, Technical University of Liberec, Studentska 2, 46117, Liberec, Czech Republic
a Corresponding author: jan.novosad@tul.cz
This article deals with numerical investigation of flow and mixing of air and sulphur dioxide SO2 in designated mixing chamber. The mixing chamber is a part of experimental laboratory reactor designed for simulating the flue gas desulfurization (FGD) process. Aim of this work is the numerical investigation of effect of different mixing chamber geometries to mixture composition, especially to mass fraction of sulphur dioxide. Using of similar concentration of sulphur dioxide in the experimental reactor as in the real process is necessary to be able to make additional research. Conclusion describes the effect of different geometries of mixing chamber to mixing. The aim of this work is to develop perfectly works mixing chamber, which will be manufactured and then implemented into experimental FGD reactor. The results will be validated by experiment after the mixing chamber will be manufactured.
© The Authors, published by EDP Sciences, 2017
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.