MATEC Web Conf.
Volume 88, 20172016 International Conference on Biomaterials, Nanomaterials and Composite Materials (CBNCM 2016)
|Number of page(s)||6|
|Section||Chapter 1: Processing and Manufacturing Technologies of Materials|
|Published online||09 December 2016|
A Fast and Efficient Dehydration Process for Waste Drilling Slurry
School of Environment and Chemical Engineering, Tianjin Polytechnic University, Tianjin 300387, China
a Corresponding author: firstname.lastname@example.org
In this article, slurry system was converted to colloid from fluid with the colloidization of high polymer coagulants with high viscosity. The solid-liquid separation of the waste slurry was realized by the process of chemical colloidal gel breaking, coagulation function, acidification gelout. In addition, the surface morphology of slurry cake was investigated by using Field emission scanning electron microscope (FE-SEM). The results indicate that mud separation effect is decides on the type of flocculants, gel breaker. The solid content of mud cake increases from 40.5% to 77.5% when A-PA and H20 are employed as the flocculants, gelout, with the dosage of zero point four grams and zero point five grams.
© The Authors, published by EDP Sciences, 2017
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.