| Issue |
MATEC Web Conf.
Volume 85, 2016
Chemistry and Chemical Technology in XXI Century (CCT 2016)
|
|
|---|---|---|
| Article Number | 01025 | |
| Number of page(s) | 6 | |
| DOI | https://doi.org/10.1051/matecconf/20168501025 | |
| Published online | 17 November 2016 | |
Features of chemical-mineralogical composition and processing properties for medium-ferrous bauxites
Tomsk Polytechnic University, Tomsk, Russia
* Corresponding author: lgovorovatpu@yandex.ru
The features of chemical-mineralogical composition and processing properties of bauxites from Iksinsk and Severoonezhsk deposits are investigated in the paper. It is found that the studied bauxites are coarsely dispersed and low-dispersive, high-alumina clay raw materials with a high content of colouring oxides. According to their mineralogical composition, Iksinsk and Severoonezhsk bauxites are boehmite-hydrargillite-kaolinite clay bauxites. Moreover, Iksinsk bauxite samples are characterized by the total absence of quartz impurities. The samples of plastic molding based on Iksinsk bauxites are fully sintered at 1500 °C with the formation of strong structures with a compressive strength of 70-120 MPa (depending on the variety of bauxites). The samples based on Severoonezhsk bauxites are fully sintered at 1450 °C, and they are characterized by a compressive strength to 70 MPa in the sintered state.
© The Authors, published by EDP Sciences, 2016
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.