| Issue |
MATEC Web Conf.
Volume 79, 2016
VII Scientific Conference with International Participation “Information-Measuring Equipment and Technologies” (IME&T 2016)
|
|
|---|---|---|
| Article Number | 01040 | |
| Number of page(s) | 7 | |
| DOI | https://doi.org/10.1051/matecconf/20167901040 | |
| Published online | 11 October 2016 | |
Radiotomography Based on Monostatic Interference Measurements with Controlled Oscillator
Radiophysics Faculty, Tomsk State University, 634050, Tomsk, Russia
* Corresponding author: sdy@mail.tsu.ru
The method of three-dimensional tomography based on radioholography measurements with the reference signal transmitted by the transmitter in the near zone and the receiver near zone. We solve the problem of repairing the object signal phase due to the reference signal in the near field in a wide frequency band and the consideration of analytical signals. Here are presented results of experimental studies on application of a tunable YIG (yttrium iron garnet) oscillator in the frequency range from 6.5 to 10.7 GHz for radio tomography of metal objects in air. Holographic principle is applied on the basis of measuring of the interference field amplitude by the detector diode. The interference occurs with the direct wave and waves scattered by the object. To restore the radio images the method of aperture synthesis and extraction of quadrature components at all frequencies sensing are applied. Experimental study on test object shows resolution about 15 mm.
© The Authors, published by EDP Sciences, 2016
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.