Issue |
MATEC Web Conf.
Volume 76, 2016
20th International Conference on Circuits, Systems, Communications and Computers (CSCC 2016)
|
|
---|---|---|
Article Number | 02017 | |
Number of page(s) | 6 | |
Section | Systems | |
DOI | https://doi.org/10.1051/matecconf/20167602017 | |
Published online | 21 October 2016 |
The coordinate system transformation of a serial kinematic structures and use in the derivation of systems motion equations
Tomas Bata University in Zlín, Faculty of Applied Informatics, Nad Stráněmi 4511, 760 05 Zlín, Czech Republic
a Corresponding author: zatopek@fai.utb.cz
This text discusses the use of transformation matrices to determine the motion equations of the complex mechanical structure. Use of the transformation matrix does not apply only to motion equations but has the general use in relative positions determine of objects in the 3D space. Analysed model is divided into seven physical objects, the transformation matrix and the corresponding inertia/pseudo-inertia matrix is included in each of them. This matrices are strictly necessary to the system dynamic description using the matrix form of Lagrange Equations of the Second Type. Another possibility to use the transformation matrix is shown in the camera system measurement. Model was designed in 3D CAD system SolidWorks, MATLAB was used for the mathematical calculations.
© The Authors, published by EDP Sciences, 2016
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.