MATEC Web Conf.
Volume 73, 2016XV International Conference “Topical Problems of Architecture, Civil Engineering, Energy Efficiency and Ecology – 2016”
|Number of page(s)||8|
|Section||Energy Efficiency, Renewable Energy Sources, “Green” Buildings and Sustainable Development|
|Published online||11 August 2016|
Solutions to Improve the Thermal Protection of the Administrative Building
1 Peter the Great St. Petersburg Polytechnic University, 195251 Polytechnicheskaya, 29, St. Petersburg, Russian Federation
2 University of Guilan, 4199613776 Khalij Fars highway, Ghazvin road, Rasht, Iran
* Corresponding author: firstname.lastname@example.org
At the end of the 90s, with the introduction of changes in the regulatory documents of the Russian Federation №3 to SNiP II-3-79*, regulatory requirements for thermal protection of buildings were revised towards increase. For this reason, the buildings built till 2000 don't conform to modern requirements. The actual solution of this problem is to carry out works on renovation of facades of the existing buildings with the use of innovative materials. As object of research one of educational cases of Peter the Great St. Petersburg Polytechnic University has been chosen, where by practical consideration the size of the actual thermal resistance of external walls has been determined by heat flux meter, the numerical value of which was significantly lower than the standard values. Based on the obtained data two modern ways of thermal insulation of facades (Ventilated Façade System (VFS) and External Thermal Insulation Composite System (ETICS)) have been analyzed, the assessment of energy saving potential and the discounted payback period of the investments directed to warming of facades has been made.
© The Authors, published by EDP Sciences, 2016
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.