MATEC Web Conf.
Volume 72, 2016Heat and Mass Transfer in the System of Thermal Modes of Energy – Technical and Technological Equipment (HMTTSC-2016)
|Number of page(s)||4|
|Published online||09 August 2016|
The Influence of Gas-Phase Hydrogenation Parameters on the Processes of Activation, Sorption and Accumulation of Hydrogen in the Powder of Pure Titanium
National Research Tomsk Polytechnic University, 634050 Tomsk, Russia
* Corresponding author: email@example.com
The technique for hydrogenation of powder hydrogen-storage materials based on gas-phase hydrogenation method has been developed in this work. The using of developed technique allow prepare pure titanium powder samples with hydrogen concentration in range from 0.5 to 4 wt.%. It was showed, that pressure increasing from 0.5 to 2 atm at constant temperature 400 °C leads to decreasing of powder activation time from 140 to 15 s. Temperature increasing on 50 °C and more degrees leads to significant decreasing of powder activation time. Pressure increasing from 0.5 to 2 atm leads to increasing of hydrogen sorption rate and concentration in 1.27 and 1.19 times respectively. Temperature increasing from 400 to 550 °C leads to increasing of hydrogen sorption rate in 1.3 times, but decreasing of hydrogen concentration in 1.45 times, which associated with decreasing of hydrogen saturation limit. Optimal values of temperature (400 °C) and pressure (2 atm) for pure titanium powder hydrogenation have been determined.
© The Authors, published by EDP Sciences, 2016
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.