Issue |
MATEC Web Conf.
Volume 72, 2016
Heat and Mass Transfer in the System of Thermal Modes of Energy – Technical and Technological Equipment (HMTTSC-2016)
|
|
---|---|---|
Article Number | 01038 | |
Number of page(s) | 5 | |
DOI | https://doi.org/10.1051/matecconf/20167201038 | |
Published online | 09 August 2016 |
The Effect of the Substrate Temperature and the Height of the Mini-Channel on the Evaporation of Liquid Droplet Blown by the Gas Flow
1 Kutateladze Institute of Thermophysics SB RAS, 630090 Novosibirsk, Russia
2 Novosibirsk State University, 630090 Novosibirsk, Russia
3 Novosibirsk State Agricultural University, 630039 Novosibirsk, Russia
4 National Research Tomsk Polytechnic University, 634050 Tomsk, Russia
* Corresponding author: orlik.evgeniy@gmail.com
The experimental setup has been designed and fabricated to study the evaporation of liquid droplets, blown by the gas flow in a mini-channel with a height of 6 and 9 mm. Substrates were removable, and the surface temperature of the substrate was maintained at a constant level. The shadow method was the main method of measurement. A series of experiments with a water drop of 100 μl volume settled on a polished stainless substrate were carried out. As a result the dependences for the droplet evaporation rate were obtained in the range of temperatures 25–70 °C and Reynolds numbers of gas 0–2000.
© The Authors, published by EDP Sciences, 2016
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.