| Issue |
MATEC Web Conf.
Volume 68, 2016
2016 The 3rd International Conference on Industrial Engineering and Applications (ICIEA 2016)
|
|
|---|---|---|
| Article Number | 02002 | |
| Number of page(s) | 5 | |
| Section | Mechanical Engineering | |
| DOI | https://doi.org/10.1051/matecconf/20166802002 | |
| Published online | 01 August 2016 | |
Increasing of the Work Productivity of CMM Machine by Applying of Augmented Reality Technology
Technical University of Kosice, Faculty of Manufacturing Technologies with a Seat in Presov, Sturova 31, 080 01 Presov, Slovak Republic
a Corresponding author: monika.teliskova@tuke.sk
This article is focused on the area of metrology and possibility of connection between 3D coordinate measuring machine and augmented reality technology. The aim of this contribution was to bring close the possibilities of augmented reality for example by visualization of important zones during the measurement process. The use of this application is very useful and if the user needs to measure some object after the long time, he does not know, which points were defined for alignment or which position was set for measured object. In this case the use of augmented reality can be very useful.
© The Authors, published by EDP Sciences, 2016
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.