Issue |
MATEC Web of Conferences
Volume 55, 2016
2016 Asia Conference on Power and Electrical Engineering (ACPEE 2016)
|
|
---|---|---|
Article Number | 06012 | |
Number of page(s) | 5 | |
Section | Dynamic Load Modelling and Renewable Energy System | |
DOI | https://doi.org/10.1051/matecconf/20165506012 | |
Published online | 25 April 2016 |
A Design of Ultra-wideband Filter with Band-notched Characteristic Based on Left - Handed Materials
School of Electric and Information Engineering,Guangxi University of Science and Technology, 545006, Liuzhou, Guangxi, P. R. China
a Corresponding author: ZWB@gxut.edu.cn
Based on the concept of left-handed material (LHM), a novel ultra-wideband (UWB) planar filter with negative permittivity and permeability was designed and proposed in this paper. By etching a cross-coupled structure on the surface of substrate , the filter achieved a frequency pass band of 2.86 - 11.22 GHz, which meets requirement of the UWB applications. Moreover, a notch frequency band of 7.26 - 9.13 GHz also achieved simply by increasing the length of the left hand cross side structure. HFSS software was used to design and optimise the filter .The subtract of the filter is with a relative dielectric constant of 2.55 and the overall size of the filter is 7.6×16 × 0.8 mm3.
© Owned by the authors, published by EDP Sciences, 2016
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.