MATEC Web of Conferences
Volume 51, 20162016 International Conference on Mechanical, Manufacturing, Modeling and Mechatronics (IC4M 2016)
|Number of page(s)||6|
|Section||Chapter 1: Engineering Simulation, Modelling and Analytical Studies|
|Published online||06 April 2016|
Vibration Characteristics of Tapered Roller Bearings with Roller Diameter error
Department of Mechanical System Engineering, Kumoh National Institute of Technology, 61 Daehak-ro, Gumi, Gyeongbuk, Republic of Korea 730-701
a Corresponding author: email@example.com
This study investigates the vibration characteristics of tapered roller bearings with the presence of error in roller diameter. A general model for tapered roller bearing with five degree-of-freedom was adopted with taking into account the error in roller diameter. Then, the effect of one single errored roller and multiple errored rollers on the vibration behaviour of tapered roller bearing was investigated. Simulation results confirmed that the bearing vibration frequencies are equal to cage rotational frequency in the case of axial preloading, and multiple of cage rotational frequency in the case of combined loadings, irrespective of the error magnitude, the number or position of errored rollers, which, however, significantly affect the vibration amplitude of bearing.
© Owned by the authors, published by EDP Sciences, 2016
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.