| Issue |
MATEC Web of Conferences
Volume 45, 2016
2016 7th International Conference on Mechatronics and Manufacturing (ICMM 2016)
|
|
|---|---|---|
| Article Number | 02004 | |
| Number of page(s) | 5 | |
| Section | Modeling and simulation of mechanical system | |
| DOI | https://doi.org/10.1051/matecconf/20164502004 | |
| Published online | 15 March 2016 | |
Modeling and analysis of grinding force in ultrasonic honing considering the scale effect
Key Laboratory for AMT of Shanxi, North University of China, Taiyuan 030051, China
To research the power ultrasonic honing mechanism at the micro scale, the scale effect is considered and the strain gradient plasticity theory based on the dislocation mechanism (MSG) is applied to establish the model of a whetstone grinding force, and the simulation analysis is conducted. Results show: the grinding force will increase when the scale effect is considered; the main influence parameter is honing depth on the grinding force; the grinding force increases nonlinearly with the continued reduce of honing depth after which decreases to 1.4 μm, which decreases slightly with the increase of the relative velocity of a whetstone. So the material becomes difficult to remove at the micro scale.
© Owned by the authors, published by EDP Sciences, 2016
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.