MATEC Web of Conferences
Volume 40, 20162015 International Conference on Mechanical Engineering and Electrical Systems (ICMES 2015)
|Number of page(s)||5|
|Section||Mechanical engineering and dynamics|
|Published online||29 January 2016|
A Method to Analyze Dynamics Properties of Transfemoral Prosthesis
1 Shibaura Institute of Technology, Japan
2 Tokyo Denki University, Japan
3 University of Human Arts and Science, Japan
4 Niigata University of Health and Welfare, Japan
Abstract.The methodto compute gait cycle forces and moments acting on the hip and knee joints of a lower limb with a trans-femoral prosthesis were investigated. A 3D model of the lower limb with prosthesis was created using CAD software and based on MRI data and real size dimension. The transfemoral prosthesis was modelled as a coupled of links with two revolution joints at hip and knee joint. This coupled link was connected to a bar with translation joint to description the distance walked of people in gait cycle. All parts of the prosthesis were measured and a full-size 3D model was created.The kinematics parameters of a lower limb with a prosthesis were determined from motion-captured system data. The reaction force was measured with a force sensor in the footplate. The 3D model of the prosthesis was exported to MatlabSimmechanics. The input data which are kinematic parameters were applied to calculate the forces and moments acting on the joints. The results of this study present a method to analyse the dynamic properties of transfemoral prosthesis including speed of the gait. It could be used to calculate the load transferred from the socket to the residual limb. They could also be used to design the structure of a prosthesis and optimize the dynamic characteristics of such a prosthesis.
© Owned by the authors, published by EDP Sciences, 2016
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.