MATEC Web of Conferences
Volume 38, 2016UTP-UMP Symposium on Energy Systems 2015 (SES 2015)
|Number of page(s)||5|
|Section||Thermal Engineering & Energy Conversion|
|Published online||11 January 2016|
Experimental investigation of the effect vertical oscillation on the heat transfer coefficient of the finned tube
1 Mechanical Engineering Department, Universiti Teknologi PETRONAS, 32610 Bandar Seri Iskandar Perak, Malaysia
2 Control and System Engineering Department, University of Technology, Baghdad, Iraq
a Corresponding author: Saleem.firstname.lastname@example.org
The aim of this work is to investigate experimentally the effect of the forced vibrations on the free convection heat transfer coefficient using heated longitudinally finned cylinder made of Aluminium. The effect of the vibration frequency ranged from 2 to16 Hz with various heat fluxes ranged from 500-1500 W/m2. It was found that, the relation between the heat transfer coefficient and amplitude of vibration increased for all inclination angles from (0°-45°), while the increment of inclination angle decreases the values of convection heat transfer coefficient. The results show that the heat transfer coefficient ratio (hv/ho) of longitudinal finned cylinders in (0°) angle was (8%) and (30%) greater than those for the (30°) and (45°) respectively.
© Owned by the authors, published by EDP Sciences, 2016
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.