| Issue |
MATEC Web of Conferences
Volume 28, 2015
2015 the 4th International Conference on Advances in Mechanics Engineering (ICAME 2015)
|
|
|---|---|---|
| Article Number | 05004 | |
| Number of page(s) | 5 | |
| Section | Mechatronics and energy engineering | |
| DOI | https://doi.org/10.1051/matecconf/20152805004 | |
| Published online | 28 October 2015 | |
The Effects of Either Height of Bellows Ends on the Stress Distribution according to Rotation Angles
Department of Aeronautical and Mechanical Eng., Hanseo University, 236-49, Gomsum-ro, Nammyun, Taean, Chungnam, Korea
a Corresponding author: jbkim@hanseo.ac.kr
As analysis research, the effect of either height of bellows ends on the stress distribution has been proposed in the study. Rotation angle only is considered as a boundary condition. FEM solution for a u-shaped flexible tube under the action of angle of rotation is obtained. The design factor, convolution height of bellows ends, is considered for the simulation. The analysis is performed using the finite element analysis program. The maximum von-Mises stress and its reduction rate according to the height of bellows ends is compared respectively.
© Owned by the authors, published by EDP Sciences, 2015
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.