| Issue |
MATEC Web of Conferences
Volume 25, 2015
2015 International Conference on Energy, Materials and Manufacturing Engineering (EMME 2015)
|
|
|---|---|---|
| Article Number | 03001 | |
| Number of page(s) | 8 | |
| Section | Manufacturing Engineering | |
| DOI | https://doi.org/10.1051/matecconf/20152503001 | |
| Published online | 06 October 2015 | |
Accident Analysis and Prevention Measure of Dynamic Load Mine Pressure of the 31201 Fully Mechanized Working Face of Shigetai Coal Mine
1 College of Highway, Chang’an University, Xi’an, Shaanxi, China
2 Shenhua Shendong Coal Group Corporation, Shenmu, Shaanxi, China
3 College of Highway, Chang’an University, Xi’an, Shaanxi, China
* Corresponding author: 290785858@qq.com
In order to eliminate the potential safety hazard of concentrated coal pillar of overlying coal seam occurring in the extraction process of 31201 fully mechanized working face of Shendong Shigetai coal mine, we formulate safety measures for the next extraction by analyzing the pressure data collected by the hydraulic support in the extraction process. According to research results, there exists irregular room-mining goaf of Coal 22 above Coal 31, and the existing concentrated coal pillar and scattered coal pillar in room-mining goaf parallel to the working face may cause the fully mechanized working face to form secondary roof structure, moreover, the primary reason for large-area roof fall accident is that the concentrated coal pillar of Coal 22 is destroyed and loses stability, thus leading to the dynamic load in the extraction process of Coal 31. We analyze the data of the extraction process of Coal 31 through technical measures such as pressure observation, micro-seismic monitoring, multiple position extensometer inside stratum and surface observation, aiming at the reason for roof fall; and we formulate a set of complete prevention measures, aiming at overlying goaf and extraction pressure of this working face, so as to offer effective safety guarantee for the next extraction of this working face and also offer reference for the extraction of similar working faces.
Key words: fully mechanized working face / overlying goaf / concentrated coal pillar / dynamic load mine pressure / hidden danger management
© Owned by the authors, published by EDP Sciences, 2015
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.