MATEC Web of Conferences
Volume 23, 2015Heat and Mass Transfer in the Thermal Control System of Technical and Technological Energy Equipment
|Number of page(s)||5|
|Published online||31 August 2015|
Influence of the thickness absorbing film on the PETN ignition threshold by a laser pulse
1 Kemerovo State University, 650043 Kemerovo, Russia
2 National Research Tomsk Polytechnic University, 634050 Tomsk, Russia
a Corresponding author: email@example.com
Numerical simulation of the PETN ignition by a film, which is heated by a laser pulse was conducted. There are shown that dependence of threshold energy of ignition of PETN by a laser pulse has a linear dependence from the thicknesses of the absorbing film. Calculations shown that critical the temperature on the boundary of two materials by the end of a laser pulse with threshold density doesn’t depend from the thickness of the absorbing film. The ignition delay time of PETN by the thick film less than the ignition delay time of PETN by the thin film. The reason is that the thicker contain more heat then in the thinner one.
© Owned by the authors, published by EDP Sciences, 2015
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.