Issue |
MATEC Web of Conferences
Volume 11, 2014
International Congress on Materials & Structural Stability
|
|
---|---|---|
Article Number | 02010 | |
Number of page(s) | 5 | |
Section | Structures & Stability | |
DOI | https://doi.org/10.1051/matecconf/20141102010 | |
Published online | 28 April 2014 |
Novel method to measure the soil clay’s permeability by laser interferometry
Nouvelle méthode pour mesurer la perméabilité des sols argileux par interférométrie laser
1 Equipe de recherche d’Optique et Photonique, Faculté des Sciences, Tétouan, Maroc
2 Laboratoire : Matériaux et systèmes interfaciaux, Faculté des Sciences, Tétouan, Maroc
In this study, we’ll present a new method to measure the permeability of clay soils (or infiltration rate) by laser interferometry. The device is a modified Michelson interferometer. Indeed on the movable mirror is glued a clay sample in the form of a parallelepiped, dried, of length L, height H and shaped to retain the drops of water on its surface to control water’s content .When injecting a volume of distilled water (a few drops) to the surface of the sample, it swells and moves the mirror, then we can measure the swelling depending on the depth of a clay soil and its permeability. Therefore we measure time that takes water to reach a depth of Z and we determine the infiltration rate: V=6μm/s ± 3% in concordance with literal values included between 2,8 and 13,9μm/s in clayey silt. For this comparison, we used the study of the characterization of the clay fraction to our sample by XRD.
Résumé
Dans cette étude nous présentons une nouvelle méthode pour mesurer la perméabilité (ou vitesse d’infiltration) des sols argileux par interférométrie laser. Le dispositif est un interféromètre de Michelson modifié. En effet sur le miroir mobile est collé un échantillon d’argile ayant la forme d’un parallélépipède, séché, de longueur L, de hauteur H et façonnée de manière à retenir les gouttes d’eau à sa surface pour contrôler la teneur en eau. Lorsqu’on injecte un volume d’eau distillée (quelques dizaines de gouttes) à la surface de l’échantillon, celui-ci se gonfle et le miroir se déplace, on peut ainsi mesurer le gonflement en fonction de la profondeur d’un sol argileux et la perméabilité. Nous mesurons ainsi le temps que met l’eau pour atteindre une profondeur Z et nous déterminons sa vitesse d’infiltration : V=6μm/s ± 3% en bon accord avec les valeurs de la littérature qui sont comprises entre 2,8 et 13,9 μm/s dans les limons argileux. Pour cette comparaison nous avons utilisé l’étude de la caractérisation de la fraction argileuse de notre échantillon par DRX.
© Owned by the authors, published by EDP Sciences, 2014
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 2.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.