Issue |
MATEC Web of Conferences
Volume 2, 2012
IInd International Seminar INVACO – Innovation & Valorization in Civil Engineering & Construction Materials
|
|
---|---|---|
Article Number | 01013 | |
Number of page(s) | 6 | |
Section | Construction materials | |
DOI | https://doi.org/10.1051/matecconf/20120201013 | |
Published online | 03 September 2012 |
Study of the effect of the nature of aggregates on the mechanical behaviour of the concrete in hot and dry zones «Contribution of the curing»
Etude de l’effet de la nature des granulats sur le comportement mécanique du béton en zones chaudes et arides «Contribution de la cure»
1 Laboratoire de Recherches de Génie Civil, Université de Laghouat, Algérie.
2 Laboratoire de Matériaux et Réhabilitation de Structures, Université de Laghouat, Algérie.
Laghouat est parmi les villes de l’Algérie riches en matériaux de différentes natures, tels que les roches calcaires massives et les matériaux alluvionnaires meubles siliceux et silico-calcaires. L’objectif premier de ce travail est d’établir une comparaison des performances mécaniques des bétons préparés avec de granulats de natures différentes. Nôtre second objectif est l’étude de l’influence de la cure sur la résistance à la compression et la résistance à la flexion des bétons étudiés. Les échantillons sont conservés sous un climat chaud et sec réel qui est le climat de Laghouat. Nous avons utilisé comme cure: le film plastique, la toile de jute mouillée et l’immersion dans l’eau. A travers ce travail expérimental, nous avons pu constater que les meilleures résistances à la compression sont obtenues dans les bétons à sable siliceux et celles à la flexion sont obtenues dans les bétons à granulats calcaires. La conservation du béton dans une ambiance aride sans protection augmente sa résistance mécanique à jeune âge, mais à long terme, cette dernière chute d’une façon significative. L’étude a mis en évidence la nécessité de l’emploi d’un super plastifiant et de l’application immédiate de la cure pour le bétonnage en climat chaud.
Abstract
Laghouat is among the cities of Algeria rich in materials of various natures, such as the massive limestone rocks and the natural river materials. The first objective of this work is to establish a comparison of the mechanical performances between concretes with aggregates of different natures. The second objective is to study the effect of curing on the compressive and the flexural strength of concretes. Samples are conserved under a real hot and dry climate which is the climate of Laghouat. We used as curing: plastic film, wet hessian and immersing in water. Through this work, we noticed that the best compressive strengths are obtained in concretes with siliceous sand and the highest flexural strengths are obtained in concretes with limestone aggregates. The conservation of the concrete under dry conditions without any protection increases its mechanical strength at young age, but at long-term, it decreases significantly. The study put in evidence the necessity of the use of a superplasticizer and the immediate application of curing for the concreting in hot climate.
Mots clés : Béton / Calcaire / Alluvionnaire / Résistance mécanique / Cure
© Owned by the authors, published by EDP Sciences, 2012
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.