Issue |
MATEC Web Conf.
Volume 389, 2024
11th International Symposium on Occupational Health and Safety (SESAM 2023)
|
|
---|---|---|
Article Number | 00080 | |
Number of page(s) | 6 | |
DOI | https://doi.org/10.1051/matecconf/202438900080 | |
Published online | 10 January 2024 |
Workers exposure to synthetic textiles microfibers
1 The National Research and Development Institute of Occupational Safety (INCDPM) - “Alexandru Darabont”, 35A Ghencea, 061692, Sector 6, Bucharest, Romania
2 The National Research and Development Institute for Textiles and Leather, 16, Lucretiu Patrascanu, 030508, Sector 3, Bucharest, Romania
* Corresponding author: scarlatpamela@yahoo.com
* Corresponding author: steparaluca@yahoo.com
The textile industry is one of the most polluting sectors, its contribution to the growing contamination with microfibers being of recent interest. Microfibers are an important part of microplastics, a real problem in our society. Textiles are dominated by synthetic fibres, generating microfibres as environmental contaminants. Exposure may also occur in the workplace, but fewer studies address this topic. Although synthetic microfibres toxicity is not fully understood, is accepted that their dimensions can influence health effects. This study analysed the length and diameter of 201 airborne polyester fibres sampled in the working environment of a textile factory. Phase contrast microscopic analysis was performed using NIOSH method 7400. Three size categories were considered for the length: small (≤ 10 μm), medium (10 - 100 μm) and large (≥ 100 μm). Four diameter categories: thin (≤ 1 μm), medium (≤ 2 μm) and thick (≤ 3 μm) were defined. Diameters over 3 microns were considered elongated microplastics. Results show that most of the fibres (93%) were less than 100 μ long (20.1% being less than 10 μ) and the fibres with 1μ diameter were predominant (42.8%) Such fibres may reach into the bronchial tree and even further, where they may cause health problems.
© The Authors, published by EDP Sciences, 2024
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.