| Issue |
MATEC Web Conf.
Volume 346, 2021
International Conference on Modern Trends in Manufacturing Technologies and Equipment (ICMTMTE 2021)
|
|
|---|---|---|
| Article Number | 03066 | |
| Number of page(s) | 7 | |
| Section | Mechanical Engineering | |
| DOI | https://doi.org/10.1051/matecconf/202134603066 | |
| Published online | 26 October 2021 | |
Scientific and Technical Aspects of Interference Fits Hydropress Assembling Automation Using Mechatronic Press
Kalashnikov Izhevsk State Technical University, 7, Studencheskaya street, Izhevsk, 426069, Russia
* Corresponding author: ms_istu@mail.ru
The study object - technological process of interference fits assembling is identified, the scheme with oil supply from the end face is adopted as the technological scheme. Technological pressing equipment is considered, its applicability for hydropress assembling is evaluated. The main aspects of hydropress joints assembling on a base of mechatronic press are established: increasing of assembling performance, its stability. Mathematical models and an algorithm that regulate the process of liquid friction and formation of an oil layer between the contacting surfaces of joint mating parts are developed. The basic requirements for the regulation channels of control system that ensure the quality of hydropress fits during automated assembling are established.
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.