| Issue |
MATEC Web Conf.
Volume 285, 2019
16th Symposium of Structural Dynamics (DYNKON 2019)
|
|
|---|---|---|
| Article Number | 00014 | |
| Number of page(s) | 8 | |
| DOI | https://doi.org/10.1051/matecconf/201928500014 | |
| Published online | 12 July 2019 | |
Numerical model of tracked vehicle crossing inland water
Silesian University of Technology, Institute of Theoretical and Applied Mechanics, Konarskiego 18a., 44-100 Gliwice
* Corresponding author: mariusz.pawlak@polsl.pl
In this paper, a numerical model of tracked vehicle with a simplified suspension and a winch forcing movement at a constant speed of 2 m / s is presented. The simplified vehicle body was created in the CAD environment, the suspension model, dry and wet obstacle, as well as the winch system and material models, were created in the LS PREPOST. The body of the vehicle was treated as a rigid, mounted by springs and dampers on tracks, the solid element was replaced by a shell element with assigned moments of inertia and mass in the node located in the centre of gravity of the vehicle. The characteristics of the resultant contact force of vehicle travel on the rigid ground for a dry and water obstacle are presented.
© The Authors, published by EDP Sciences, 2019
This is an open access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.