| Issue |
MATEC Web Conf.
Volume 276, 2019
International Conference on Advances in Civil and Environmental Engineering (ICAnCEE 2018)
|
|
|---|---|---|
| Article Number | 05003 | |
| Number of page(s) | 6 | |
| Section | Geotechnical Engineering | |
| DOI | https://doi.org/10.1051/matecconf/201927605003 | |
| Published online | 15 March 2019 | |
Peat soil mass stabilization using geopolymeric hybrid material in early age
Department of Civil Engineering, Universitas Riau, Pekanbaru, Indonesia
* Corresponding author: g.wibisono@eng.unri.ac.id
Peat is an organic soil, highly compressible and has high water content. The soil needs to be stabilized chemically by incorporating binders such as cement and lime into the soil that will change the properties and soil strength. However, stabilization using cement solely is not recommended since the organic acid in peat soil could delay cement hydration process. Furthermore, mass stabilization using pozzolanic material also could improve strength development of peat soil. In this research, the pozzolanic material in the form of geopolymer hybrid or geopolymer with the addition of Ordinary Portland Cement was investigated. Geopolymer was produced by activating fly ash with a combination of NaOH and sodium silicate. OPC addition improves initial strength and assists geopolymerization at ambient temperature. Variables studied were binder content and a percentage of OPC, and percentage of fly ash. Unconfined Compressive Stress (UCS) at 7 days was measured for all specimens. Mass stabilization using fly ash geopolymer hybrid could improve strength development of peat soil.
© Owned by the authors, published by EDP Sciences, 2012
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.