| Issue |
MATEC Web Conf.
Volume 256, 2019
The 5th International Conference on Mechatronics and Mechanical Engineering (ICMME 2018)
|
|
|---|---|---|
| Article Number | 03003 | |
| Number of page(s) | 5 | |
| Section | Modern Measurement and Control Technology & Key Technologies | |
| DOI | https://doi.org/10.1051/matecconf/201925603003 | |
| Published online | 23 January 2019 | |
Numerical Study of the Thermal Model on High Uniformity Temperature Test Platform
1 Beijing Institute of Spacecraft Environment Engineering, Beijing 100094, China
2 School of Astronautics, Beihang University, Beijing 100191, China
The surface temperature uniformity of a test platform with an effective test area of 600 mm × 600 mm was numerically studied. The conductive heat transfer model for the test platform and the device under test (DUT) installed on the surface was established in the present work, as well as the radiation heat transfer model from the platform surface to the background temperature. The platform surface was divided into 5 or 9 regions where heated independently to make the surface temperature consistent. The temperature uniformity of these two partition designs was compared. The result shows that the 9 regions design has higher temperature uniformity at both target temperatures of -10°C and +45°C.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.