| Issue |
MATEC Web Conf.
Volume 250, 2018
The 12th International Civil Engineering Post Graduate Conference (SEPKA) – The 3rd International Symposium on Expertise of Engineering Design (ISEED) (SEPKA-ISEED 2018)
|
|
|---|---|---|
| Article Number | 06014 | |
| Number of page(s) | 11 | |
| Section | Environmental Engineering | |
| DOI | https://doi.org/10.1051/matecconf/201825006014 | |
| Published online | 11 December 2018 | |
First flush analysis of urban stormwater runoff from an urban catchment in Johor, Malaysia
Department of Water and Environmental Engineering, School of Civil Engineering, Faculty of Engineering, Universiti Teknologi Malaysia, 81310 Johor Bahru, Johor, Malaysia
* Corresponding author: noraliani@utm.my
An increase of pollutants that are present in the initial stage of stormwater runoff hydrograph compared to a later stage of runoff is defined as a first flush phenomenon. This study aims to investigate the occurrence of first flush from samples of urban stormwater runoff obtained from the grounds of a University in Skudai, Johor, Malaysia. In order to achieve the study’s objective; field investigations, manual sampling of urban stormwater runoff, laboratory testing and data analysis were carried out and the evaluation of the first flush phenomenon was calculated using concentration-based first flush (CBFF) and mass-based first flush (MBFF. A total of 90 stormwater samples were collected from six (6) rainfall events and were tested for total suspended solids (TSS). For each rainfall event, the pollutographs and the dimensionless curves of the cumulative pollutant mass versus the cumulative discharged volume were plotted. The first flush coefficient was also determined in order to evaluate the occurrence of first flush. The results indicated that the storm events demonstrated a weak presence of first flush.
© The Authors, published by EDP Sciences, 2018
This is an open access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.